• Why Is My 18R2 Showing a Dash on the Screen After a Firmware Update?
• Why does my 18R2 keep displaying PAU when starting a script?
• What is the battery life of the 18R2?
• When I startup my 18R2, what are the sequence of numbers/information appearing before the channel displays?
• The SYNC LED is blinking on my 18R2, what does this mean?
• What is the maximum number of modules I can sync to an 18R2?
• How do I know my modules are armed from my 18R2?
• What is the STEP button?
• How-to use the basic STEP Firing feature of the 18R and 18R2
• What is the AUTO-FIRE button?
• How to use the AUTO FIRE feature of the 18R and 18R2
• How do I remove the faceplate on my 18R2?
• What happens if the battery harness or plastic housing breaks?
• What is the fastest way to bulk sync your modules and Audio Box to the 18R2?
• Can I operate more than one 18R2 Controller at the same shoot site?
• If I power off my 18R2, will my modules stop firing?
• What is the best way to disarm a show?
• Can I upgrade the firmware on the 18R2?
• Can I upgrade my 18R2 to support SMPTE time code input?
• Can I upgrade my 18R2 to support Deadman?
• I armed the 18R2 Controller, but the green continuity LEDs are not displaying, why is this?
• How long does it take to arm the modules from the 18R2?
• How do I clear scripts from the 18R2?
• What is a device address?
• What is the number that appears when the TEST/ARM LED become solid?
• My ARM/TEST LED flashes, then the letter A followed by two numbers, what is this?
• How do I know my modules are synced to the 18R2 Controller?
• I have a 36M or 72M, how are the banks fired from the 18R2?
• How do I clear or unsync the 18R2 from my modules? (Er50)
• What is the difference between a channel and an address?