If I power off my 18R2, will my modules stop firing?

Zach Gilbert
Documentation Team
Updated

Yes, turning off the 18R2 will cause the modules to stop firing after a defined period of time. Using firmware 4.0.0 and lower the module disarms in approximately 10 seconds, modules on firmware version 5.0 disarm in about 20 seconds, and modules using firmware version 5.1 and higher will disarm in about 60 seconds. On firmware 8.0 (beta), this disarm time is configurable using the Script Timeout setting (script column K), adjustable from 10 to 300 seconds with a default of 60. A value of 0 disables the timeout entirely, so the modules will continue firing even with no signal from the remote. Use this with caution. See Script Format for details. In order to disarm the modules immediately, we suggest pressing the TEST / DISARM button.

Was this article helpful?
2 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more
Our Support Team Hours:
We can be reached by phone at 518-741-4300 or email help@cobrafiringsystems.com
Emergency Shoot Site Support
COBRA offers a 24-hour support system for on-site emergencies. If you are on a shoot site and encounter a show-stopping issue, please reach out to us via phone at 929-930-6868.