My Audio Box is showing a -0 or no signal, why?

There are two reasons why your Audio Box may be displaying no signal on your 18R2 or COBRA Control Panel while using firmware 5.1.

Due to network communication changes in firmware 5.1 COBRA Audio Box devices that are on the A hardware platform will require another COBRA module on and synced to the same 18R2 in order to display signal.

Firmware 5.1 contains changes in how the Audio Box reads the USB drive. If there is no USB drive in the Audio Box USB port while the device is on the Audio Box will repeatedly attempt to read the USB drive. This indexing causes the Audio Box to display no signal on the 18R2 or Control Panel and plugging in a USB drive will resolve this.

Was this article helpful?
1 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more
Our Support Team Hours:
We can be reached by phone at 518-741-4300 or email help@cobrafiringsystems.com
Emergency Shoot Site Support
COBRA offers a 24-hour support system for on-site emergencies. If you are on a shoot site and encounter a show-stopping issue, please reach out to us via phone at 929-930-6868.