Zach Gilbert
Director Customer Operations COBRA Firing Systems
Articles
-
What is the battery life of the Audio Box?
Current 2000mAh LiPo Battery 10 Hours of Operation Legacy 3 x AA Batteries* 1.5 Hours of Operation *COBRA recommends Energizer brand batteries.
-
When should the SYNC LED blink on my 18M?
The SYNC button should blink consistently on your 18M when synced to a remote that is powered on and in range. If you have not yet synced your module and controller please see out support document ...
-
COBRA Firmware Version 5.1.4 Stable Release Candidate for COBRA Audio Box
COBRA Firmware Version 5.1.4 Stable Release Candidate 5.1.4 added support for the Gen 2 Audio Box upgrade kit and the Gen 2 Audio Box complete unit. The purpose of this update is for customers inst...
-
I created my script in Finale Fireworks, how do I start the script?
Finale Fireworks defaults the trigger channel as 00 and the trigger button as 1. Therefore, to start the script, arm your 18R2 and go to channel 00 and press button 1.
-
What channel is the Audio Box on?
Even though the Audio Box does not fire pyrotechnics, it does reside on channel 99 for signal strength reporting. To test the Audio Box signal strength, navigate to channel 99 on your 18R2 and pres...
-
What is the light button on the 18M?
When pressed, the light button will brighten the 7 segment display, LEDs, and turn off the backlight on the keypad. When the 7-segment display is brightened and the backlight is powered off, the u...
-
My 18R2 displays signal after my module is turned off, why is this?
The 18R2 will still show a modules' last known antenna signal strength as reported by the module, even if the module is turned off. This value will remain in memory until the 18R2 is power cycled. ...
-
COBRA Firmware Version 5.1.3 Stable Release Candidate
5.1.3 firmware has been replaced by 5.1.4.Please note 5.1.3 does not support the Gen 2 Audio Box and firmware 5.1.4 is required. 5.1.3 is a patch release to 5.1.2/5.1.1 firmware. While it's possibl...
-
Can I use SMPTE or FSK to start the script on the 18R2?
Yes, you can use SMPTE time code to start a script if you have the COBRA SMPTE Adapter. For more information on SMPTE please see SMPTE User Guide, and for SMPTE script examples please see Can I ref...
-
What is an XLR connector, and what is the difference between the single unbalanced and dual balanced option?
An XLR connector is an electrical connector primarily used for professional audio and video electronics, as opposed to home audio/video equipment using RCA connectors. Please note that all audio ou...