The 7.1.0 BETA release includes includes the following fixes. Please note that all equipment will require a firmware update. To update the firmware, please use the COBRA Reprogramming Software. Please also make sure to update your COBRA Control Panel from Google Play.
- All Modules - (Critical Issue Fix) A module, partial module, or bank may not fire.
- 18R2 / Control Panel - Jump to re-enabled in Control Panel for timed and STEP events
- 18R2 / Control Panel - Elapsed time showing incorrectly when jumping is performed
- 18R2 / Control Panel - Changing firing mode now supported from Control Panel
- Audio Box - Audio skipping may occur if SMPTE is used with 18R2 together with the Audio Box
- Control Panel Gen 2 - The UI may display a 36M or 72M’s key state momentarily in the wrong position. This only affects the 36M and 72M modules.
- 18M Hardware B - When initiating a STEP command from the 18R2 from a scripted show, if a module does not receive the STEP command, it’s possible an event may fire late and eventually re-align once the heartbeat from the 18R2 is received.
- 36M/72M - When firing a DMX script followed by a combined PYRO script, the DMX from the first script may fire in the subsequent PYRO script.
Comments
Please sign in to leave a comment.