1. COBRA Firing Systems
  2. FAQs
  3. Clip-on/Talon Igniter FAQs

What is the difference between e-match and Talon/Clip-on Igniter mode?

Zach Gilbert
Documentation Team
Updated

E-match mode will enable your module to send a 0.1-second pulse of current for each firing command. In Talon/Clip-on Igniter mode, the duration of the firing pulse increases to a full two seconds. 

The default setting for our firing modules is e-match mode. To select Talon/Clip-On Igniter mode, press SYNC and CH+ on the module simultaneously until "2.0" or "2.0s" is displayed on the screen. Press SYNC and CH- if you wish to return to e-match mode, a "0.1" or "0.1s" will be displayed. You can also change the firing modes from the Device List on the Control Panel app.       

Was this article helpful?
12 out of 12 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more
Our Support Team Hours:
We can be reached by phone at 518-741-4300 or email help@cobrafiringsystems.com
Emergency Shoot Site Support
COBRA offers a 24-hour support system for on-site emergencies. If you are on a shoot site and encounter a show-stopping issue, please reach out to us via phone at 929-930-6868.