By default, the 6M operates on cues 1-6, as one would expect. However, you can configure the module to operate on cues 7-12 or 13-18. For example, you could have one 6M on cues 1-6, another on cues 7-12, and another on cues 13-18. This flexibility prevents the operator from needing to change the channel and enables the operator to press all 18 buttons on a single channel more efficiently.
To change the cue range firing modes, press TEST and CH+ or TEST and CH- at the same time. 1, 7, or 12 will display to confirm the mode. Once you set the module to the desired mode, the module will remember it even if powered off, or if you remove the battery. The Cue Range Firing Mode displays during the startup sequence.
Comments
Article is closed for comments.