Arming your Firing Modules with the 18R controller

You are now ready to arm the firing modules and set each firing module to fire mode. 

  1. To arm the firing modules, rotate the Key Switch clock-wise to the far-right into the ARM position. 
  2. To ARM all synced firing modules from the 18R, press the ARM/FIRE Button on the controller. 

Important! When arming the controller, the red LED will blink for about five seconds and will go solid if no firing modules are determined to have their key in the TEST position. DO NOT fire your systems until the red LED is solid. If the LED continues to blink, one of your modules still has the key in the TEST position.



Was this article helpful?
1 out of 1 found this helpful

Articles in this section

Our Support Team Hours:
9:00am - 5:00pm EDT Monday to Friday. We can be reached by phone at 518-741-4300 or email
Emergency Shoot Site Support
COBRA offers a 24-hour support system for on-site emergencies. If you are on a shoot site and encounter a show-stopping issue, please reach out to us via phone at 929-930-6868.