COBRA Firmware Version 6.1.7 Release

Scott Smith
Product Development Team Documentation Team
Updated

The COBRA 6.1.7 release includes the following fixes.

  • 18R2 - When manually firing cues when armed, the cue continuity would disappear from the channel. This issue is now fixed as the cue continuity remains and the proper firing statuses display.

To update your 18R2, please use the following steps:

  1. Download the 6.1.7 cobra.s19 file attached to this article.
  2. Place cobra.s19 file into the root direction of a USB drive.
  3. Insert USB drive into the 18R2 while off.
  4. Hold SYNC and power on 18R2. The LEDS will circle as the firmware is updated.
  5. Once done, the unit will re-start and 6.1.7 will appear. Remove the USB drive.
  6. You can re-start the 18r2 to re-confirm 6.1.7 appears.
  7. You are done and the patch has been successfully applied.
Was this article helpful?
9 out of 14 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more
Our Support Team Hours:
We can be reached by phone at 518-741-4300 or email help@cobrafiringsystems.com
Emergency Shoot Site Support
COBRA offers a 24-hour support system for on-site emergencies. If you are on a shoot site and encounter a show-stopping issue, please reach out to us via phone at 929-930-6868.