Scott Smith
Articles
-
Talon/Clip-On Igniter and E-match Mode
You can assign modules to either Talon/Clip-on Igniter or E-match mode. The primary difference between Talon/Clip-on Igniter and E-match mode is the length of firing time. Talon/Clip-on Igniter mod...
-
Can I install my existing 18R2 Controller in to the Command Center?
Yes, you can install your existing remote into the Command Center. Please see the COBRA Command Center Installation Guide for assistance.
-
Can I use my 18M with the 36M and/or 72M?
Yes, you can use the 18M with the 36M and 72M, but all of your equipment must be on firmware 5.0.2 or higher. For more information on upgrading your firmware, please see How do I update the firmwar...
-
What is the fastest way to bulk sync your modules and Audio Box to the 18R2?
All devices need to be in program mode (P) to bulk sync your controller to your modules and Audio Box. To enter program mode, power on the controller, and after the controller completes the startup...
-
Can an Audio Box Feed SMPTE to Other Systems Including Firing Systems and DMX Controllers?
Yes, the COBRA Audio Box can send SMPTE to firing systems and DMX controllers. Simply load the SMPTE Timecode MP3 onto a USB drive, insert it into the Audio Box, and connect it to another system. T...
-
What type of connector is used to receive SMPTE in to the 18R2?
The 18R2 uses an RCA connector to receive SMPTE time code.
-
Can I connect multiple DB25 and CEN50 together to gain longer distances?
Yes, using our Female to Female DB25 or Female to Female Centronics Adapters, multiple cables can be combined to create longer distances.
-
When I pause my show on the 18R2, will the Audio Box pause?
Yes, when you pause the show on the 18R2 by pressing the ARM / PAUSE button (some 18R2s only show the word ARM), the Audio Box will pause automatically. You can resume the show by pressing the ARM ...
-
Does the 36M/72M use the same key as an 18M?
Yes, the 36M and the 18M use the same key and key switch.
-
What is the best way to disarm a show?
The COBRA 18R2 Controller features the ability to pause a script while running. This is helpful in the event of a shoot site emergency. To pause a show, press the ARM/Pause button on the 18R2 to p...