Scott Smith
Articles
-
What gauge is the right angle adapter cable?
The right-angle DB25 cable is 24 AWG.
-
COBRA Firmware Version 7.0.2 Critical Release
The 7.0.2 critical release includes a patch to the 18R2 and 36M/72M with the following fixes: Modules will not fire the script if the script's first event is a STEP event and all other events in t...
-
Do all modules use the same charger and charge port?
Yes, all modules use the same charger and charge port, 20V, and approximately 300mA of charge current.
-
Recharge Upgrade Kit Installation Guide
The COBRA 18M comes in two power configurations, the 9V battery, and a 14.8V internal rechargeable. If the module was purchased as a 9V module an upgrade can be performed to add the rechange and ex...
-
COBRA Firmware Version 6.1.1 Critical Release
The 6.1.1 critical release includes a patch to the 18R2 that prevents modules from firing if the script's first event is a STEP event and all other events in the script are timed events. If your sc...
-
Firmware Compatibility Guide
The COBRA firing systems ecosystem consists of many devices including the 18R2, 18M, 36M, 72M, 6M, and Audio Box. Firmware is the embedded software in our hardware that gives life to the device. CO...
-
COBRA Firmware Version 7.0.1 BETA Release
The COBRA 7.0.1 BETA release introduces some larger new features as explained below. Please note that several of these features including module and event group disabling, and multiple script firin...
-
What is the number that appears when the TEST/ARM LED become solid?
When the TEST/ARM LED light is solid, the total number of devices that are on, and communicating with the 18R2 are displayed on the upper 7-segment display. All devices, including the 18M, 36M, ...
-
COBRA Firmware Version 6.1.0 Stable Release
The 6.1.0 stable release candidate includes the following minor improvements and bug fixes. Note that all improvements and bug fixes are also included within the 7.0 release. Total Events in COBRA...
-
I already own a booster, can this be installed in to the Command Center?
Yes, you can install your existing booster into the Command Center. Please see the COBRA Command Center Installation Guide for assistance.