Scott Smith
Articles
-
What type of mounting options are available for the 6M?
The 6M has an optional mounting rail that mounts to blind screw holes on the back of the device. This mounting rail allows the 6M to be affixed to varying surfaces using screws, and also offers st...
-
How to use the AUTO FIRE feature of the 18R and 18R2
AUTO FIRE is a feature that allows the execution of firing sequences with a fixed time delay between each cue. For example, if module one needs to fire cues one through twelve with a half-second de...
-
Firing
The COBRA system is equipped with several types of firing features ranging from basic manual firing to fully automated scripting. Firing Mode COBRA supports professional E-Match, MJG Firewire Ini...
-
COBRA Firmware 7.1.2 Critical Release
The 7.1.2 critical release includes a patch to the 18R2 with the following fix: Within an optimization change to 6.1.4, an issue was introduced where a script may not fire specific cues due to log...
-
Do I need an ATF license to purchase MJG initiators?
No, an ATF license is not required to buy MJG Initiators.
-
Can the 18R2 output SMPTE time code?
No, the 18R2 only receives Timecode; however, you can output SMPTE with an Audio Box. Please see Can an Audio Box feed SMPTE to other systems including firing systems and DMX controllers? for more ...
-
What are the pin-outs on the 6M DB9 to Airburst 9" Adapter Cable?
The pin-outs on the 6M DB9 to Airburst 9" Adapter Cable are:
-
Does my Audio Box require a specific firmware to use with the 18R2?
Yes, your COBRA system must be running at least 3.0.3. To check firmware compatibility please see Firmware Figured Out.
-
How do I remove the faceplate on my 18R2?
You may want to remove the faceplate from the front of your 18R2, for example, if it were to be damaged. This process is easy and should only require a Phillips head screwdriver, a 5/16" wrench, an...
-
COBRA Firmware Version 6.1.5 Critical Release
The 6.1.5 critical release includes a patch to the 18R2 with the following fix: Within an optimization change to 6.1.4, an issue was introduced where a script may not fire specific cues due to log...