Converting any 36M or 72M Module to Quickplugs is possible, but the necessary product needed depends on the Module you currently own:
- If you have a 36M with Onboard Cues that you want to upgrade to the 36M with Quickplugs, you will need to order the 36M Armored Quickplug Conversion Kit, which includes a smaller Armored Case and Pro-Adapt Plate, as well as your choice of Side-Exit Configuration, if you would like to keep your Slat connectors.
- If you currently have the 36M with 18s Slats, or 36M with 36s Slats in an armored case, then you will just need the Pro-Adapt Plate for 36M with Quickplugs in Small Armored Case. The current Faceplate can be swapped for the new Pro-Adapt Plate by removing the thumb screws on top, installing the Module to the new Plate, and re-installing the Module with Quickplug Plate to the Case.
- If you currently have the 36M in an Armored Case, and no longer desire to use the Case, or already have a Slat only 36M without an Armored Case, there is also the option to purchase the smaller Quickplug Pro-Adapt Plate for 36M, which can connect directly to the core Module. A Silicone Boot can be used to protect this version of the Module.
- Similar to the 36M, converting the 72M with Onboard Cues to the 72M with Quickplugs requires the 72M Armored Quickplug Conversion Kit, which also includes a smaller Armored Case and Pro-Adapt Plate, but in this case, you keep the same onboard Slat connectors as the 72M with Onboard Cues.
- If you currently have the 72M with 18s Slats, or 72M with 36s Slats, then you will just need the Pro-Adapt Plate for 72M with Quickplugs in Small Armored Case. Just like the 36M, the current Faceplate can be swapped out for the new Pro-Adapt Plate by removing the thumb screws on top, installing the Module to the new Plate, and re-installing the Module with Quickplug Plate to the Case.
- If you currently have the 72M in an Armored Case, and no longer desire to use the Case, or already have a Slat only 72M without an Armored Case, there is also the option to purchase the smaller Quickplug Pro-Adapt Plate for 72M, which can connect directly to the core Module. A Silicone Boot can be used to protect this version of the Module.
If you have any questions about which Module you have, and which option you will need to convert your Module to Quickplugs, please contact the Support Team by phone at 518-741-4300 or email help@cobrafiringsystems.com.
Comments
Article is closed for comments.