In COBRA Reprogramming Software (CRS), the Hardware type detection screen (Settings, then Hardware type detection) can show a 36M or 72M with a firmware version that does not match the update you installed. For example, it can show "Radio: 6.1.0" for a module you updated to firmware 6.1.9. The numbers look different, but if the Report screen showed the update as done, nothing is wrong.
Why don't the two numbers match?
A 36M or 72M module has two parts that each carry their own firmware: the radio and the mainboard.
The radio firmware does not change in every release. When the radio did not need a change, the new release ships the same radio build as before. Firmware release 6.1.9 includes radio 6.1.0, so a module updated to 6.1.9 correctly shows "Radio: 6.1.0".
Why does it say "Mainboard (S19): unknown"?
CRS can read the radio version from the module. It cannot read the mainboard (S19) version, so it shows "unknown" for that line. This is how the app is built. It does not mean the update failed or that anything is wrong with the module.
How can I check that my update worked?
Look at the Report screen in CRS. If it shows the update as done, the update worked. You can also turn the module off and on again. It shows its firmware version when it turns on.
Still not sure?
Contact COBRA support and give us the support code from the Report screen. We can check exactly what was installed.
Comments
Please sign in to leave a comment.